WORKSAFEPAT

PAT Testing - Rhondda Valleys and Surrounding Areas

If you are looking for a reputable Pat testing company that can cover the Rhondda and surrounding areas then please give us a call. We are based just down the road in Cardiff and have many satisfied customers around South Wales.
Contact the Specialists - servicing Salons, offices, factories and industrial locations with literally hundreds of satisfied and returning clients. 

  • Fully Insured
  • Calibrated Test Equipment
  • Qualified Technicians
  • Services Carried out in Accordance with Health and Safety Executive Guidance Notes and IET Code of Practice
  • Fully Itemised and Detailed Inspection and Test Results
  • Risk Based Assessment Frequencies
  • Duty Holder Training
  • Over 20 Years Experience

PAT Testing the Rhondda

We provide Pat Testing across the Rhondda Valley from Porth (The Gateway) through Rhondda Fawr with customers in Tonypandy, Clydach Vale, Ton Pentre, Treorchy and across the other side of the valley into Rhondda Fach. The Worksafepat brand is well established throughout Rhodda Cynon Taf, not only for PAT Testing but also for PAT Testing training. 

Inspecting/Testing Sensitive IT Equipment @250Vdc Schools and Colleges - Worksafepat

More Than a Label

Prior to any electrical tests we always carry out 'Formal inspections' in accordance with the IET Code of Practice. We will Check the Following:
  • Suitability of the Equipment for the Environment
  • Trip Hazards, Overloading of Leads and Adaptors
  • Switching of Equipment
  • Correct Cable Cross Sectional Area for Equipment Current Rating
  • Substandard CE/IEC/BS1362 Leads/Fuses/ Equipment
  • Correct Fuse Rating for Rated Flexible Cable
  • Advice on User Checks in Line with HSE Guidlines and IET Code of Practice, then the electrical tests
  • Portable RCD Trip Timing (If Required)
  • Microwave Radiation Leakage Testing (If Required)
  • Polarity Testing of Class 1 IEC leads and Extension Leads
  • Earth Bond Resistance to Earthed (Class 1 Appliances) to Strict Parameters
  • Insulation Testing to Class 1 and Class 2 Appliances 500Vdc/250Vdc relevant to Environment and Sensitivity of Equipment including Surge Protected Equipment
  • Current Leakage Testing to Parameters set out by the IET Code of Practice.
  • Status Labelling of Equipment
  • Technician Notes and Advisories of Potential Risks Found
  • DETAILED INSPECTION/TEST RESULTS FOR YOUR INSURANCE PURPOSES - NOT JUST A PASS/FAIL

Please be aware of companies that claim to 'pat test' unrealistic amounts of items per hour/day and charge for items that do not require formal inspection and testing such as appliances supplied via a voltage source below 50 Volts ie. laptops, routers and other extra low voltage equipment, although the leads and adaptors that supply them may require inspection and testing depending upon construction, we come across rogue or unqualified service providers very frequently.

© Worksafepat Ltd

Worksafepat Ltd  Ty Menter, Parc Navigation, Abercynon. CF45 4SN

In-service Inspection and Testing (Pat Testing) is carried out by:
 WORKSAFEPAT Testing Services Ltd,  Frazier Blg, 126 Bute St, Cardiff, CF10 5LT

Privacy Policy Cookie Policy